Weidmuller IE-MC-VL Series Guia de Instalação descarregar pdf (Página 11)

Dip Switch Setting

IE-MC-VL Series DIP switch

123

ON DIP

Dip Switch 1 (Default: Off )

ON: Enables the PORT Alarm. If the port’s link fails,

the relay will form an open circuit and the fault

LED will light up.

Off: Disables the corresponding PORT Alarm. The

relay will form a closed circuit and the Fault

LED will never light up.

Dip Switch 2 (Default: ON )

ON: Enables full duplex for 100BaseFX

Off: Disables full duplex for 100BaseFX

Dip Switch 3

Reserved for future use

To activate the updated DIP switch settings, power off and then

power on the Media Converter.

LED Indicators

The front panel of the Media Converter contains several LED

indicators. The function of each LED is described in the table below.

LED Color State Description

Power is being supplied to

power input PWR1

PWR1 AMBER

Off

Power is not being supplied

to power input PWR1

Power is being supplied to

power input PWR2

PWR2 AMBER

Off

Power is not being supplied

to power input PWR2

When the corresponding

PORT alarm is enabled,

and the port’s link is

inactive.

FAULT RED

Off

When the corresponding

PORT alarm is enabled and

the port’s link is active, or

when the corresponding

PORT alarm is disabled.

TP port’s 10 Mbps link is

active

Blinking

Data is being transmitted at

10 Mbps

10M GREEN

Off

TP Port’s 10 Mbps link is

inactive

100M GREEN

TP port’s 100 Mbps link is

active

- 11 -

1 2 ... 6 7 8 9 10 11 12 13 14

Comentários a estes Manuais

Sem comentários

Weidmuller IE-MC-VL Series Guia de Instalação Página 11

Comentários a estes Manuais