Weidmuller PTX800A - Configurable counter and totalizer Manual do Utilizador descarregar pdf (Página 34)

Analogue output type and range

The output type (current/voltage) is like the input type as it is set by

manufacturing. The output range parameters let the PTX800A show

the output range correctly during review mode and prompt for the

correct values during calibration. They have no affect on the operation

of the instrument. If you change them you must be prepared to

calibrate the outputs.

Out

put Action

Direct action results in the normal, proportional output. Reverse action

gives an output that is inverted with respect to the rate, so a rate of

zero gives a full scale output and vice versa.

Dis

play Intensity

There are fourteen different levels.

• Setup Sequence

Setting Display Description

Å ì

PGM

S/W Version

vEr_1.01

S/W Version 1.01 - - Next

Inputs

Input type

InP=Cur

InP=voLt

Current (mA) based signal

Voltage based (V) based signal

Toggle Accept

Input range

low value

InpLO=

4.00

Introduces Input low value

Value, e.g., 4.00 mA

Dec

Inc

Input range

High value

InpHI=

20.00

Introduces Input high value

Value, e.g., 20.00 mA

Dec

Inc

Input Calibra-

tion?

CALInY

CALInn

Calibrate the inputs

Skip Input calibration

Toggle Accept

Damping

Factor

dFaCtor=

Introduces Input damping factor

Damping Factor , e.g., 2

Dec

Inc

Transfer

Function

L nEAr

SQrroot

Linear

Square root

Toggle Accept

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 47 48

Comentários a estes Manuais

Sem comentários

Weidmuller PTX800A - Configurable counter and totalizer Manual do Utilizador Página 34

Comentários a estes Manuais

Manuais e produtos relacionados com Hardware Weidmuller PTX800A - Configurable counter and totalizer